 |
Bostitch RHS8D113HDG Galvanized Diamond Point Nail |
 |
Bostitch
-Stick Framing Nails 21 Degree-Plastic Collated Smooth Shank-Hot Dipped- Round Head Boxed-Lgth X Dia. Inches=2-3/8 X .113-Box of 5000 |
|
 |
Bostitch RN46-1 Factory Reconditioned 1/4" Coil Roofing Nailer, 70-120 PSI |
|
Bostitch
The Bostitch RN46-1 is a Factory Reconditioned 1/4" NPT Roofing Nailer. The RN46-1 roofing nailer weighs 4.8 lbs featuring magnesium housing for job site durability. Aggressive wear guards, non-skid pads and carbide inserts in the tip for long life. The Bostitch RN46-1 is the only roofing nailer to feature integrated last nail capture so it won't fire when it runs out of nails. With its patented single-action side load canister, the nailer has 410 in-lbs of power for the toughest applications. A quick set adjustable depth control makes for consistent nail drives. An over molded grip provides comfortable use and the shingle guide requires no tool for adjustment. |
|
 |
Bostitch SX150K-1 Factory Reconditioned 18 Gauge Narrow Crown Stapler |
|
Bostitch
-Lightweight magnesium housing for jobsite durability -Oil-free operation prevents stains on workpiece -Ultra quiet rear exhaust -Open nose design for easy jam clearing -Adjustable depth control for quick countersinking adjustments -Over molded comfort grip -Narrow nose for accurate fastener placement into hard-to-reach areas -Fastener range: 1/2" to 1 1/2" |
|
 |
BVA Hydraulics CA3814 Adaptor 3/8" NPTF to 1/4" NPTF |
|
OMEGA Lift Equipment
BVA Hydraulics CA3814 is a Reducer from 3/8" NPTF to 1/4" NPTF |
|
 |
BVA Hydraulics CB1438 Bushing from 1/4" NPTF to 3/8" NPT |
|
OMEGA Lift Equipment
BVA Hydraulics CB1438 Bushing from 1/4" female to male 3/8" |
|
 |
BVA Hydraulics CF3814 1/4" NPTF Gauge Fitting |
|
OMEGA Lift Equipment
BVA Hydraulics CF3814 is a 1/4" NPTF Gauge Fitting -Universal Application |
|
 |
BVA Hydraulics GD4014 4" Face Diameter Gauge 1/4" NPTF |
|
OMEGA Lift Equipment
-Full compliance under ANSI B40.1 (+/- 1% accuracy) standard -Dual calibration PSI/ BAR -Exterior made of steel -Large diameter face Used in a multiple of applications |
|
 |
BVA Hydraulics GW4014 4" Face Diameter, Liquid Gauge 1/4" NPTF |
|
OMEGA Lift Equipment
-Full compliance under ANSI B40.1 (+/- 1% accuracy) standard -Dual calibration PSI/ BAR -Exterior made of steel -Large diameter face Used in a multiple of applications |
|
 |
Cal-Van 191 Pitman Arm Wedge |
|
Cal-Van
Removes pitman arms and similar operations with ease Zinc plated alloy steel will not mushroom or bend 11-3/4" long, 1-1/8" jaw opening |
|
 |
Cal-Van 258 2-1/8" to 3-7/16"" Tailpipe Expander |
|
Cal-Van
Designed to quickly and easily straighten out clamp dents in mufflers and tailpipes Extremely rugged tool, made of the toughest steel Capacity: 2-1/8" to 3-7/16" |
|
 |
Cal-Van 28 Universal Pilot Bearing Puller |
|
Cal-Van
Removes bearings and bushings on flywheels, pumps, generators, etc. Includes 1/2" to 1-1/4" (13 to 32 mm) inner diameter capacity jaws |
|
 |
Cal-Van 498 Flange Type Axle Puller |
|
Cal-Van
Can be used as a regular wheel or hub puller as well as a flange type pullerBolt circle range from 4-1/2" to 5-1/2" (114-140 mm) which covers all major cars and small trucks with flange type axlesFour slots in the adapter allow this tool to be used on either 4, 5, or 6 bolt design axlesExtra heavy 5-1/4 lb. slide hammer with 5/8"-18 threads |
|
 |
Cal-Van 526 Flange Type Axle & Front Wheel Hub Puller |
|
Cal-Van
Designed for use on domestic and import cars and light trucks with independent front suspension When brake or front wheel bearing service is performed, the deep throat of this tool allows the necessary removal of the front hubs Center screw is 5-1/2" long with 5/8"-18 threads. Range is 3-3/4" to 4-1/2" (95-114 mm). Without the center screw, this tool also removes the flange type axles on compact, sub-compact, and many import cars For use on either 4, 5, or 6 bolt axles. All non C-clip locking GM axles. Can be used tih #499 flange type axle puller |
|
 |
Cal-Van 765 Tailpipe & Tubing Cutter |
|
Cal-Van
Adjustable cutter for exhaust and tailpipes, and thin-wall copper and steel tubing 16 cutter wheels, ranging from 3/4" to 3" (19-76mm) diameter Knurled handle adjusts cutting wheel chain Instructions included |
|
 |
Campbell Hausfeld AT1210 60 Lb. Capacity Sandblaster |
|
Campbell Hausfeld
-The AT1210, sandblaster easily remove rust, scale and paint from parts and small equipment, leaving a satin finish ready for paint or further prep. They can also be used in craft work to etch glass and weather wood. Siphon-feed design sprays most abrasives including glass beads, aluminum oxide, steel grit, silicon carbide. Hopper holds 60-pounds of abrasive, doubling work-time over 30 pound hopper. Requires 9-SCFM |
|
