 |
Adjustable Clamp 8018 Parallel Steel Bar Clamp 18 inch |
 |
Adjustable Clamp
Designed for cabinet assembly work with 30% larger clamping face, 10% longer screw travel, larger handle and a reversible head for spreader clamping. Used in commercial, home-shop and do-it-yourself application. |
|
|
Adjustable Clamp 8024 Cabinet Master Parallel Steel Bar Clamp 24 inch |
|
Adjustable Clamp
Designed for cabinet assembly work with 30% larger clamping face, 10% longer screw travel, larger handle and a reversible head for spreader clamping. Used in commercial, home-shop and do-it-yourself application. |
|
|
Adjustable Clamp 8036 Parallel Steel Bar Clamp 36 inch |
|
Adjustable Clamp
Designed for cabinet assembly work with 30% larger clamping face, 10% longer screw travel, larger handle and a reversible head for spreader clamping. Used in commercial, home-shop and do-it-yourself application. |
|
|
Adjustable Clamp 8048 Parallel Steel Bar Clamp 48 inch |
|
Adjustable Clamp
Designed for cabinet assembly work with 30% larger clamping face, 10% longer screw travel, larger handle and a reversible head for spreader clamping. Used in commercial, home-shop and do-it-yourself application. |
|
 |
Adjustable Clamp 8406 6" Square Throat Clamp |
|
Adjustable Clamp
-Regular-Duty, Extra deep throat design with heat treated drop-forged Carbon Steel Frames. Anvil is extra large and broached for flatness. Screw is heat treated with smoothly rolled or cut threads, swivel is turned steel ball -and -socket type |
|
 |
Adjustable Clamp 8510 Pony 2 Pk Cabinet Claw |
|
Adjustable Clamp
-For face frame cabinet installation-Design tightens & aligns-Allows pre-drilling of pilot holes & fastening-Install two stiles from 1-1/2 to 2" width-Up to 1-1/2" thickness each-Aluminum claw alignment plate-Screws: 1/2" diameter, cold drawn steel-Plastic handles |
|
 |
Adjustable Clamp 8520K Pony Euro Claw (2 Pack) |
|
Adjustable Clamp
The Adjustable Clamp 8520K is a pack of 2 Pony Euro Claws. These claws operate on the same principle as the cabinet claw. It functions with multiple steps for frame less (euro) cabinet installations. These clamps never need to be removed from the job until installation is complete. Claws align cabinets for mounting and fastening in one easy step. Cams and alignment plate have special non-marring material to protect work. |
|
 |
Adjustable Clamp 9180 PONY 90° Angle Clamp |
|
Adjustable Clamp
Use this clamp for mitering or butting joints. Perfect for framing and cabinet assembly. -2 1/2" miter/butt joint capacity-1 1/8" T-joint capacity-Non-marring plastic coated die cast jaws-Rear jaw swivel for easy adjustment on material thickness-Large comfortable handles-Large comfortable handle-Acme threads for strength |
|
 |
Adjustable Clamp 9448 PONY 4-Corner Framing Clamp |
|
Adjustable Clamp
The Adjustable Clamp 9448 PONY is a 4-corner framing clamp. The framing clamp kits include lengths of threaded rods, light-weight plastic corners and thumb-nuts which allow size adjustments for rectangular clamping. It is ideal for framing. |
|
 |
Adjustable Clamp 9850 Pony Mounted Bracket and Collar Set for 3/4 inch Pipe |
|
Adjustable Clamp
The Adjustable Clamp 9850 is a PONY Mounted Bracket & Collars for 3/4 inchPipe. It is ideal for limited space. The patented collar designs create a mounted base for Style No. 50 PONY pipe clamp fixtures for 3/4 inchpipe. The bracket is mounted onto wall studs or a frame and collars are placed into the bracket. Pipes are inserted into pre-drilled holes and secured with the thumbscrews. Pony # 50 clamp fixtures can be installed onto the pipe yielding a clamping frame, work-bench or free-standing work station. |
|
 |
Adjustable Clamp Company 7236 36" Steel I-Bar Clamp |
|
Adjustable Clamp
-Extra carbon and manganese content, size 1-1/2" x 7/16" x 5/32" without notches or deformity-Multiple disc clutch grips automatically at any point-Secure hold and easy release-Malleable castings with orange baked enamel finish-Screws of cold-drawn steel, 5/8" diameter with deep smooth threads and hardened thrust bearing-Solid one-piece handle recommended-Plain crank with loose wood grip optional |
|
 |
Adjustable Clamps 7248 48'' I-Bar Clamp |
|
Adjustable Clamp
-Adjustable Clamp Co. 48" I-BAR CLAMP. Opening 48''. Load Limit 7000 lbs. Features: 2" x 1-3/4" clamping face, 1-1/2" x 7/16" high-carbon steel bar; rolled to a special "I" beam shape, 5/8" cold-drawn steel screw with smoothly cut Acme threads; hardened steel thrust bearings, malleable and/or ductile iron castings; with orange baked enamel finish, crank-type handle. |
|
 |
Adjustable Clamps Jorgensen 7224 24" I-Bar Clamp |
|
Adjustable Clamp
-Fixed head design-2 ft. maximum opening-Made of extra carbon & manganese-Multiple disc clutch grips automatically-Secure and grip with easy release |
|
 |
Adjustable Clamps Jorgensen 7272 72 in. I-Bar Clamp |
|
Adjustable Clamp
-These heavy-duty clamps are designed for high-demand professional and industrial use. The steel I-bar is extremely strong and resistant to twisting and bending. The sliding head is cast of tough ductile iron and features a 4-piece, hardened steel clutch. |
|
 |
Alltrade 648402 Replacement Hone Stones for 648401 |
|
Alltrade
The Alltrade 648402 is a Replacement Hone Stones for 648401. It is a set of 3 replacement stones for 3/4" - 2.25" Brake Cylinder Hone 3 Arm. |
|
